Hague Maximiser 7180 / 7380
Powerful performance at a fraction of the running cost
The 7180 and 7380 are powerful softeners, capable of providing a lot of high-quality softened water at very low operating costs.
Depending on the needs of your home, or business, these two softeners will go on and on
You will need a good 270mm clearance above the softener to allow for salt filling.
Best of all, the softener regenerates quietly and quickly.
Operates in three languages and retains cycle settings, even through power outages (up to 7 days) or Touch Screen Smart Controller available as an option.
Simply turn the dial to BYPASS so water does not enter the appliance. To return the appliance to service, simply turn the dial to the SERVICE position.
Filters dirt and sediment smaller than the human eye can see. There's never any cartridges to change and no maintenance is required.
Helps to prevent the possibility of overflows.
Patented mineral tank allows vacuum packed resin to provide a lot of softening power in a small space, eliminating the need for a 2nd tank.
The grid plate in the separated salt storage compartment provides a dedicated compartment to ensure consistent brine concentration, and also makes it easy to keep the softener clear of salt compaction.
At Hydroworks, we have coined the phrase ‘Edge-to-Edge’ to explain the value of the complete screen design, which helps prevent channelling within the resin bed, which produces softer feeling water, every time.
The Hague Maximiser 7180 and 7380 can use either tablet salt or block salt, whichever is more convenient for you.
Tablet salt will cost you less to run, but will mean that the softener will need to be cleaned out approximately every three years, whereas block salt should create a purer brine solution meaning that regular clean-out is unnecessary.
Very Important Note: You must use a Grade A non-sea or lake sand salt.
The Hague Maximiser 7180 Water Softener specifications.
The Hague Maximiser 7380 Water Softener specifications.
The Hague Maximiser 7180 Water Softener dimensions.
Allow 270mm clearance above the softener to allow for salt-filling.
The Hague Maximiser 7380 Water Softener dimensions.
Allow 270mm clearance above the softener to allow for salt-filling.
The Hague Maximiser 7180 and 7380 both include a 3-year manufacturer guarantee.
Hydroworks alos gives this product a complete 5-year parts & labour guarantee.
